Unleash your home theater
Create the very best home theater experience with a powered subwoofer from Power Sound Audio. Energize your room with fast, dynamic bass and cinema quality sound.
-The S2112M offers a compelling balance of relatively compact size, 1920w USA built ICE amplification, and 21 inch Italian Neo woofer. With extension into the single digits combined with astonishing upper bass impact and accuracy the S2112M is a great choice for both home theater or music only systems.
-The S2112M subwoofer is powered by a 1920W RMS (4300W PEAK) built-in amplifier with ICEpower® audio technology. The amplifier incorporates a proprietary DSP (digital signal processing) software and hardware and includes all essential controls to properly integrate the subwoofer into any audio system.
-The MDF enclosure is well braced with a double thickness woofer baffle. The enclosure is finished with a non-reflective matte covering. An acoustically transparent fabric grille covers the front-firing 21 inch subwoofer driver. The amplifier is mounted on the rear baffle.
-The S2112M contains a 21 inch Neo motor woofer custom designed for Power Sound Audio from B&C in Italy. With class leading thermal handing, motor strength, and inductance considerations you are assured of powerful and accurate bass reproduction.
Design |
Sealed |
Drivers |
21" Italian Neodymium High BL Woofer
|
Powered |
Yes |
Amp |
1920W RMS (4300W PEAK)
|
Enclosure |
CNC machined MDF |
Frequency Response |
11hz-200hz Anechoic (+/-3dB)
|
In-Room Extension |
6Hz-9Hz
|
Size (DxWxH) |
24.5" x 23.75" x 23.75" with grille |
Weight |
135 lbs
|
Amp
ICEpower® audio technology
Amplifier Power: 1920 watts
Inputs: Left and Right RCA
Inputs: Left and Right XLR
12V Trigger
On, Auto, Off selector
Gain control
Time delay(phase) control
Crossover control
Room size control
Custom DSP(digital signal processing) enables superior engineering refinement
CE and FCC approved; EMC and safety pre-approved
Fully integrated amplifier and power supply with mains-converter and auxiliary-converter
Patented HCOM modulation and control techniques for unparalleled audio accuracy
Sound optimized soft clipping
Soft start power up with mute/de-mute.
Thermal and over-current protection
Standby converter with low standby power consumption (less than 1 watt)
Universal mains operation (100-240 V, 50-60 Hz)
Standby power consumption 170 mW @ 230 V
ErP (1275/2008/EC) compliant
Energy Star®v3.0 compliant
117 dBA dynamic range
THD+N = 0.005 % @ 1 W (4 Ω, 1 kHz)
THD+N = 0.0008 % @ 50 W (4 Ω, 100 Hz)
CCIF IM distortion = 0.0003 %, 10 W, 4 Ω, 18.5 kHz / 1 kHz
High output current limit of 30 A
Assembled by Power Sound Audio
Cabinet
Sealed Enclosure
Front-firing driver
Acoustically transparent grille
Non-reflective black matte finish
Precision machined CNC panels
Rigid MDF baffles
Heavily braced
Rear mounted amplifier
Rubber feet
Dimensions (DxWxH): 24.5"x23.75"x23.75" with grille
Weight: 135 lbs
Woofer
3000 W continuous program power capacity
110 mm (4 in) four layer aluminum voice coil
97 dB sensitivity
Neodymium magnet allows a very high force factor and linear excursion
Double silicone spider with optimized compliance
Ventilated voice coil gap for reduced power compression
Aluminum demodulating ring for very low distortion
