S1813M-primary
S1813M-primary
S1813M-primary
S1813M-primary
S1813M-primary
S1813M-primary

S1813M-primary

Regular price$2,199.00
/

Type

Unleash your home theater

Create the very best home theater experience with a powered subwoofer from Power Sound Audio. Energize your room with fast, dynamic bass and cinema quality sound.



-Developed for the discerning audiophile, the S1813M-primary powered home theater subwoofer is ready to pound your chest and rattle your windows. The S1813M-primary-primary is a relatively compact subwoofer with the power reserves to pack a serious punch. The 'Primary' subwoofer includes a 4000w speaker power amplifier which will provide 2500w to the primary cabinet used alone. If you connected the secondary cabinet, with a cable we include, the amplifier will provide 2000w to both cabinets. The 'Secondary' subwoofer is the same subwoofer as the primary, just without it's own amplifier. Buy together in a bundle to save $100.

-The S1813M-primary subwoofer is powered by a 4000W RMS (6000W PEAK) built-in amplifier with ICEpower® audio technology. A DSP based feature board includes the essential controls to properly integrate the subwoofer into your system.

-The MDF enclosure is well braced with a double thickness woofer baffle.  The enclosure is finished with a non-reflective matte covering. An acoustically transparent fabric grille covers the front-firing 18 inch subwoofer driver. The amplifier is mounted on the rear baffle.

-The S1813M-primary contains a single 18 inch neodymium subwoofer driver from B&C in Italy that was developed exclusively for PSA. This new woofer technology is based on a dual voice coil motor design with extraordinary motor strength, thermal handling, and sensitivity.

Design Sealed
Drivers 18" Italian Neodymium High BL Woofer
Powered Yes
Amp 4000W RMS (6000W PEAK)
Enclosure CNC machined MDF
Frequency Response 17Hz-200Hz Anechoic (+/-3dB)
In-Room Extension 7Hz-11Hz
Size (DxWxH) 22" x 20" x 20.5" with grille
Weight 79 lbs

Amp

  • Amplifier Power: 4000W RMS  6000W Peak 
  • Amplifier Topology: Innovative post-filter feedback class-D topology, achieves ruler-flat frequency response, low distortion and very high damping across the whole audio band
  • Uses latest generation power MOSFET transistors and highly optimized output stage for up to 95% efficiency, allowing quiet fan-less operation up to unprecedented power levels
  • Full featured protection: DC, overload, low impedances, shorts, under/over-voltage, overheating, etc.
  • Includes gentle soft-start and long-term power limiter to reduce the chances of  tripping breakers
  • 120VAC (optional 120VAC-240VAC for an additional charge)
  • Unbalanced Inputs: Left and Right RCA
  • Balanced Input/Output: XLR input and XLR loop output. 
  • On, Auto, Off selector
  • Gain control
  • Time delay(phase) control
  • Crossover control
  • Room size control
  • Custom DSP(digital signal processing) enables superior engineering refinement
  • LED indicators for standby and power mode
  • Cabinet

  • Sealed Enclosure
  • Front-firing driver
  • Acoustically transparent fabric grille cover
  • Non-reflective matte black finish
  • Precision machined CNC panels
  • Rigid MDF baffles
  • Heavily braced
  • Rear mounted amplifier
  • Dimensions (DxWxH): 22"x20"x20.5" includes grille
  • Weight: 79 lbs
  • Woofer

  • 3000 W continuous program power capacity
  • 100mm (4 in.) four layer aluminum voice coil
  • 98 dB sensitivity 
  • Neodymium magnet allows a very high force factor and linear excursion 
  • Double silicon spider with optimized compliance
  • Ventilated voice coil gap for reduced power compression
  • Aluminium demodulation ring for very low distortion 
  • Performance coming soon!

    See
    The Difference.

    POWER SOUND AUDIO
    The best systems your neighbors

    have ever
    Heard.


    Recently viewed