S42 Ipal
$4,299.99
-
The absolute best-in-class performance from an American assembled subwoofer. The S42 Ipal is a high output, high performance powered subwoofer destined to set the new standard in home theater bass.
-
Design Sealed
Drivers Two 21" Ipal Woofers Powered Yes Amp 4000w rms and 6400w dynamic peak Enclosure All CNC machined MDF Frequency Response 12Hz - 200Hz Anechoic (+/-3dB) In-Room Extension 5Hz - 9Hz Size (DxWxH) 34" x 24" x 24" with grille Weight 200 lbs -
Unleash your home theater
Create the very best home theater experience with a powered subwoofer from Power Sound Audio. Energize your room with fast, dynamic bass and cinema quality sound.
-
The S42 Ipal subwoofer is powered by a 4000W RMS (6400W PEAK) cabinet mounted amplifier. A DSP based feature board includes the essential controls to properly integrate the subwoofer into your system.
The all CNC machined MDF enclosure is heavily braced and assembled with rabbet joints for strong structural integrity. The enclosure is finished with a non-reflective and extremely durable textured material. Two acoustically transparent fabric grilles cover each side-firing 18 inch subwoofer driver. The amplifier is mounted on the rear baffle.
The S42 Ipal incorporates dual opposing 21 inch Ipal drivers fire from each side of the S42 Ipal to fill your home theater with cinema-quality sound. -
- Amplifier Power: 3800W RMS 6100W Peak
- Amplifier Topology: Innovative post-filter feedback class-D topology, achieves ruler-flat frequency response, low distortion and very high damping across the whole audio band
- Uses latest generation power MOSFET transistors and highly optimized output stage for up to 95% efficiency, allowing quiet fan-less operation up to unprecedented power levels
- Full featured protection: DC, overload, low impedances, shorts, under/over-voltage, overheating, etc.
- Includes gentle soft-start and long-term power limiter to reduce the chances of tripping breakers
- 120VAC (optional 120VAC-240VAC for an additional charge)
- Unbalanced Inputs: Left and Right RCA
- Balanced Input/Output: XLR input and XLR loop output.
- On, Auto, Off selector
- Gain control
- Time delay(phase) control
- Crossover control
- Room size control
- Custom DSP(digital signal processing) enables superior engineering refinement
- LED indicators for standby and power mode
-
Sealed Enclosure
- Side-firing drivers
- Reactive force canceling driver array
- Acoustically transparent fabric grille covers
- Super durable, black sand textured finish
- Precision machined CNC panels
- Rigid MDF baffles
- Heavily braced
- Rear mounted amplifier
- USA manufactured rubber feet
- Dimensions (DxWxH): 34"x24"x24" includes grilles
- Weight: 200 lbs
- Cabinet Made in the USA
- 21 inch B&C Ipal woofer design from Italy
-
6 inch split wound aluminum voice coil
-
5000 watt thermal capabilities
-
99dB sesnitivity
-
Motor force of 522(BL^2 / re)
- Extensive inductance control to optimize sound quality
-
https://www.bcspeakers.com/en/products/lf-driver/21-0/1/21ipal
-
S42 Ipal Frequency Response and Compression graphs coming soon.
