Dual TV18 Ipal-b
Sold Out
-
The TV18 Ipal combines incredibly deep extension with prodigious mid and upper bass capabilities in a large, but manageable cabinet size. The Ipal woofer is the very best quality available and you will enjoy floor shuddering bass extension as well as perfect mid and upper bass accuracy.
-
Design Vented Driver 18" Ipal Woofer Powered Yes Amp 960W RMS (2100W PEAK) Enclosure CNC machined MDF Frequency Response 14hz-150Hz Anechoic (+/-3dB) In-Room Extension 9hz-11Hz Size (DxWxH) 27" x 21" x 31" with grille Weight 140 lbs -
Unleash your home theater
Create the very best home theater experience with a powered subwoofer from Power Sound Audio. Energize your room with fast, dynamic bass and cinema quality sound.
-
The TV18 Ipal subwoofer is powered by a 960W RMS (2100W PEAK) built-in amplifier with ICEpower® audio technology. A DSP based feature board includes the essential controls to properly integrate the subwoofer into your system.
The MDF enclosure is heavily braced and assembled with rabbet joints for strong structural integrity. The enclosure is finished with a non-reflective and extremely durable textured material. An acoustically transparent fabric grille covers the front-firing 18 inch subwoofer driver. Down firing 4 inch port that widely flares externally and internally to 6 inches. The amplifier is mounted on the rear baffle.
The TV18 Ipal contains a single 18 inch Ipal neodymium subwoofer driver from B&C in Italy. This is arguably the highest quality 18 inch woofer available anywhere, at any price. The 18 Ipal can provide extreme output in a very small, dependable package.
-
- ICEpower® audio technology
- Amplifier Power: 960 watts
- Inputs: Left and Right RCA
- Inputs: Left and Right XLR
- 12V Trigger
- On, Auto, Off selector
- Gain control
- Time delay(phase) control
- Crossover control
- Room size control
- Custom DSP(digital signal processing) enables superior engineering refinement
- CE and FCC approved; EMC and safety pre-approved
- Fully integrated amplifier and power supply with mains-converter and auxiliary-converter
- Patented HCOM modulation and control techniques for unparalleled audio accuracy
- Sound optimized soft clipping
- Soft start power up with mute/de-mute.
- Thermal and over-current protection
- Standby converter with low standby power consumption (less than 1 watt)
- Universal mains operation (100-240 V, 50-60 Hz)
- Standby power consumption 170 mW @ 230 V
- ErP (1275/2008/EC) compliant
- Energy Star®v3.0 compliant
- 117 dBA dynamic range
- THD+N = 0.005 % @ 1 W (4 Ω, 1 kHz)
- THD+N = 0.0008 % @ 50 W (4 Ω, 100 Hz)
- CCIF IM distortion = 0.0003 %, 10 W, 4 Ω, 18.5 kHz / 1 kHz
- High output current limit of 30 A
- Assembled by Power Sound Audio
- Vented/Ported Enclosure
- Down-firing 4 inch port
- Front-firing driver
- Acoustically transparent fabric grille cover
- Super durable, black sand textured finish
- Precision machined CNC panels
- Rigid MDF baffles
- Heavily braced
- Rear mounted amplifier
- USA custom manufactured nylon standoffs
- Dimensions (DxWxH): 27"x21"x31" includes grille
- Weight: 140 lbs
- Cabinet Made in the USA
- 3400 W continuous program power capacity
- 4.5" four layer aluminum voice coil
- 97 dB sensitivity
- Neodymium magnet allows a very high force factor and linear excursion
- Double silicon spider with optimized compliance
- 80 mm peak-to-peak excursion before damage
- Ventilated voice coil gap for reduced power compression
- https://www.bcspeakers.com/en/products/lf-driver/18-0/2/18ipa
-
TV18 Ipal Frequency Response and Compression graphs coming soon.
