TV42 Ipal
$4,499.99
-
A true "no compromise" subwoofer that offers a stunning combination of sheer power and articulation. The TV42 has two 21 inch woofers, 3800 watt RMS. Baltic Birch vented cabinet with a two inch thick front baffle.
-
Design Vented Drivers Two 21" Ipal Woofers Powered Yes Amp 3800w rms and 6100w dynamic peak Enclosure CNC machined Baltic birch plywood Frequency Response 11Hz-150Hz Anechoic (+/-3dB) In-Room Extension 8Hz-11Hz Size (DxWxH) 28" x 24" x 54" with grille Weight 277 lbs -
Unleash your home theater
Create the very best home theater experience with a powered subwoofer from Power Sound Audio. Energize your room with fast, dynamic bass and cinema quality sound.
-
The TV42 subwoofer is powered by a 3800W RMS (6100W PEAK) cabinet mounted amplifier. A DSP based feature board includes the essential controls to properly integrate the subwoofer into your system.
The Baltic birch plywood enclosure is heavily braced and assembled with rabbet joints for strong structural integrity and has a two inch thick front baffle to minimize reactionary mass counter force from the dual 21 inch IPAL woofers. The enclosure is finished with a non-reflective and extremely durable textured material. The amplifier is mounted on the rear baffle.
The TV42 incorporates two 21 inch IPAL woofers in a large vented cabinet that is tuned unusually low for home audio. This allows powerful in room extension down to 8-11hz while also providing incredible mid and upper bass efficiency. This is truly a unique combination in the industry. -
- Amplifier Power: 3800W RMS 6100W Peak
- Amplifier Topology: Innovative post-filter feedback class-D topology, achieves ruler-flat frequency response, low distortion and very high damping across the whole audio band
- Uses latest generation power MOSFET transistors and highly optimized output stage for up to 95% efficiency, allowing quiet fan-less operation up to unprecedented power levels
- Full featured protection: DC, overload, low impedances, shorts, under/over-voltage, overheating, etc.
- Includes gentle soft-start and long-term power limiter to reduce the chances of tripping breakers
- 120VAC (optional 120VAC-240VAC for an additional charge)
- Unbalanced Inputs: Left and Right RCA
- Balanced Input/Output: XLR input and XLR loop output.
- On, Auto, Off selector
- Gain control
- Time delay(phase) control
- Crossover control
- Room size control
- Custom DSP(digital signal processing) enables superior engineering refinement
- LED indicators for standby and power mode
-
Vented Enclosure
-
Super durable, black sand textured finish
-
Precision machined CNC panels
-
Rigid Baltic birch plywood baffles
-
Heavily braced
-
Rear mounted amplifier
-
USA manufactured rubber feet
-
Dimensions (DxWxH): 28" x 24" x 54"
- Weight: 277 lbs
- Cabinet Made in the USA
- 21 inch B&C Ipal woofer design from Italy
-
6 inch split wound aluminum voice coil
-
5000 watt thermal capabilities
-
99dB sesnitivity
-
Motor force of 522(BL^2 / re)
- Extensive inductance control to optimize sound quality
-
https://www.bcspeakers.com/en/products/lf-driver/21-0/1/21ipal
-
TV42 Ipal Frequency Response and Compression graphs coming soon.
