DISCONTINUED
Unleash your home theater
Create the very best home theater experience with a powered subwoofer from Power Sound Audio. Energize your room with fast, dynamic bass and cinema quality sound.
-The XV15 vented subwoofer delivers crisp, detailed bass, while digging deep into the lowest frequencies. Combining the deep bass capabilities of a vented subwoofer and the shallow roll off of a sealed subwoofer, the XV15 is a perfect match for both movies and music. Assembled in America with mostly USA built components, the XV15 is destined to be a class leader.
| Design | Vented |
|---|---|
| Drivers | 15" High Excursion Driver |
| Powered | Yes |
| Amp | Patented digital hybrid PS BASH® 500W amplifier with DSP control |
| Enclosure | CNC machined MDF |
| Frequency Response | 21Hz-200Hz +/-3dB |
| In-Room Extension | 16Hz-18Hz |
| Size (DxWxH) | 22” x 17” x 23” |
| Weight | 75 lbs |
Amp
-Amplifier Power: 500W RMS (continuous), 1000W Peak (dynamic)-Amplifier Topology: PS BASH® - Patented hybrid amplifier uses best of Class D and Class AB
-Precision analog control through DSP (digital signal processing)
-Inputs: Left (LFE) and Right RCA connections
-0o to 180o Continuous Phase Control
-40Hz-150Hz/LFE Variable Crossover
-Off/Auto/On Selector
-Voltage: 100-120V/220-240V~50/60Hz (6.3A) with auto-switching
-Stand-By Power: Less than 1W
-Temperature sensing protection
-Driver voltage monitoring with DC offset protection
-Driver current monitoring with overload, short circuit, and load protection.
-Primary voltage monitoring to control dynamic and average power limits
-Soft limiting protection
-Frequency dependent compressors
-Energy Star compliant
Cabinet
-Vented enclosure-Down-firing driver
-USA designed 4” Precision PortTM
-Super durable, satin black textured finish and real wood veneers
-Precision machined CNC panels for perfect fit of all components
-Rigid MDF baffles
-Dimensions (D x W x H): 22” x 17” x 23”
-Weight: 75lbs
-Made in the USA
Woofer
-Power Sound Audio proprietary 15” driver-High excursion capabilities (2" peak to peak)
-Optimized motor using Finite Element Analysis (FEA)
-Low carbon steel motor structure for optimized flux flow
-Aero vented pole geometry for quiet operation and efficient cooling
-Triple stack of Y35 grade magnets
-Reinforced curvilinear kraft pulp cone
-Rubatek foam surround
-Twelve spoke aluminum frame for a rigid foundation
-Flat wound copper coil on a black anodized former allowing for effective heat dissipation and rigidity
-Single poly cotton semi-progressive, high excursion spider
-Fatigue limiting designed forty-eight tinsel count lead wire
-Assembled in the USA
15S Frequency Response
The frequency response graph shows how the subwoofer will sound for a given input frequency or tone. Accurate reproduction of the source material is achieved with a flat frequency response as shown in the graph.
15S Compression
The compression graph indicates how the output of the subwoofer changes as the input signal increases.
| 16Hz - 25Hz: | 109.4 dB |
|---|---|
| 31Hz - 50Hz: | 121.8 dB |
| 63Hz - 100Hz: | 136.5 dB |
| 16Hz - 100Hz: | 121.6 dB |
