Unleash your home theater
Create the very best home theater experience with a powered subwoofer from Power Sound Audio. Energize your room with fast, dynamic bass and cinema quality sound.
-Dual opposing 18 inch drivers fire from each side of the S3611 to produce dynamic levels of bass that will fill your home theater with cinema-quality sound. Prepare to awe your friends and family with the S3611 home audio powered subwoofer.
-The S3611 subwoofer is powered by a 1920W RMS (4300W PEAK) built-in amplifier with ICEpower® audio technology. A DSP based feature board includes the essential controls to properly integrate the subwoofer into your system.
-The MDF enclosure is heavily braced and assembled with rabbet joints for strong structural integrity. The enclosure is finished with a non-reflective and extremely durable textured material. Two acoustically transparent fabric grilles cover each side-firing 18 inch subwoofer driver. The amplifier is mounted on the rear baffle.
-The S3611 contains two 18 inch subwoofer drivers, which are capable of moving massive amounts of air. The 1.75 inch surround and poly cotton semi-progressive, high excursion spider allow the cone to move more than 2 inches peak to peak. The cast aluminum frame is mounted to the extremely linear and dynamic motor system, which provides the power to drive the cone in a symmetrical motion.
|Two 18" High Excursion
1920W RMS (4300W PEAK)
|CNC machined MDF
20" x 28" x 24" with grilles
ICEpower® audio technology
Amplifier Power: 1920 watts
Inputs: Left and Right RCA
Inputs: Left and Right XLR
On, Auto, Off selector
Time delay(phase) control
Room size control
Custom DSP(digital signal processing) enables superior engineering refinement
CE and FCC approved; EMC and safety pre-approved
Fully integrated amplifier and power supply with mains-converter and auxiliary-converter
Patented HCOM modulation and control techniques for unparalleled audio accuracy
Sound optimized soft clipping
Soft start power up with mute/de-mute.
Thermal and over-current protection
Standby converter with low standby power consumption (less than 1 watt)
Universal mains operation (100-240 V, 50-60 Hz)
Standby power consumption 170 mW @ 230 V
ErP (1275/2008/EC) compliant
Energy Star®v3.0 compliant
117 dBA dynamic range
THD+N = 0.005 % @ 1 W (4 Ω, 1 kHz)
THD+N = 0.0008 % @ 50 W (4 Ω, 100 Hz)
CCIF IM distortion = 0.0003 %, 10 W, 4 Ω, 18.5 kHz / 1 kHz
High output current limit of 30 A
Assembled by Power Sound Audio
Reactive force canceling driver array
Acoustically transparent fabric grille covers
Super durable, black sand textured finish
Precision machined CNC panels
Rigid MDF baffles
Rear mounted amplifier
USA manufactured rubber feet
Dimensions (DxWxH): 20"x28"x24" includes grilles
Weight: 137 lbs
Made in the USA
Two Power Sound Audio proprietary 18” drivers
Extended and vented pole geometry
Vented back plate to maximize air flow
Extremely linear and dynamic motor system
Epoxy reinforced cone neck/apex joint
Concentric foam surround, treated for longevity
Highly treated, rigid paper cone body
Die-cast rigid aluminum frame
Three inch diameter, four layer copper voice coil wound on a rigid multi-layer aluminum former with Kapton heat shielding
Fatigue limiting designed, silver alloy lead wires
Single poly cotton semi-progressive, high excursion spider
Paper outer dust cap with acrylic coating
Mass loading cap that also strengthens the cone body
Under spider ventilation which aids power handling and improves power compression
Assembled in the USA
S3611 Frequency Response
The frequency response graph shows how the subwoofer will sound for a given input frequency or tone. Accurate reproduction of the source material is achieved with a flat frequency response as shown in the graph.
The compression graph indicates how the output of the subwoofer changes as the input signal increases.