DISCONTINUED
Unleash your home theater
Create the very best home theater experience with a powered subwoofer from Power Sound Audio. Energize your room with fast, dynamic bass and cinema quality sound.
-Push your theater to its limits with the V3611 home theater powered subwoofer. This powerful vented home theater subwoofer delivers clean dynamic output deep into the lowest frequencies. You will stop wondering if you bought enough subwoofer once you hear the V3611.
-The V3611 subwoofer is powered by a 1920W RMS (4300W PEAK) built-in amplifier with ICEpower® audio technology. A DSP based feature board includes the essential controls to properly integrate the subwoofer into your system.
-The MDF enclosure is heavily braced and assembled with rabbet joints for strong structural integrity. The enclosure is finished with a non-reflective and extremely durable textured material. An acoustically transparent fabric grille covers both front-firing 18 inch subwoofer drivers. A high flow slot port with an egde radius is located just below the bottom driver on the front baffle. The amplifier is mounted on the rear baffle.
-The V3611 contains two 18 inch subwoofer drivers, which are capable of moving massive amounts of air. The 1.75 inch surround and poly cotton semi-progressive, high excursion spider allow the cone to move more than 2 inches peak to peak. The cast aluminum frame is mounted to the extremely linear and dynamic motor system, which provides the power to drive the cone in a symmetrical motion.
Design | Vented |
---|---|
Drivers | Two 18" High Excursion |
Powered | Yes |
Amp | 1920W RMS (4300W PEAK) |
Enclosure | CNC machined MDF |
Frequency Response | 16Hz-200Hz +/-3dB |
In-Room Extension | 11Hz-14Hz |
Size (DxWxH) | 25" x 20" x 44" with grille |
Weight | 196 lbs |
Amp
Cabinet
Woofer
V3611 Frequency Response
The frequency response graph shows how the subwoofer will sound for a given input frequency or tone. Accurate reproduction of the source material is achieved with a flat frequency response as shown in the graph.
V3611 Compression
The compression graph indicates how the output of the subwoofer changes as the input signal increases.
16Hz - 25Hz: | 125.2 dB |
---|---|
31Hz - 50Hz: | 132.5 dB |
63Hz - 100Hz: | 135.3 dB |
16Hz - 100Hz: | 132.0 dB |