Unleash your home theater
Create the very best home theater experience with a powered subwoofer from Power Sound Audio. Energize your room with fast, dynamic bass and cinema quality sound.
-The V1512 powered home theater subwoofer will satisfy your cravings for deep accurate bass. Feel the impact the potent V1512 subwoofer delivers during your favorite Hollywood action flick.
-The V1512 subwoofer is powered by a 960W RMS (2100W PEAK) built-in amplifier with ICEpower® audio technology. A DSP based feature board includes the essential controls to properly integrate the subwoofer into your system.
-The MDF enclosure is heavily braced and assembled with rabbet joints for strong structural integrity. The enclosure is finished with a non-reflective and extremely durable textured material. The front-firing 15 inch subwoofer driver and 4 inch Precision Port™ are mounted to the front baffle of the enclosure, and covered with an acoustically transparent grille. The amplifier mounted to the rear baffle.
-The V1512 contains a 15 inch Neo motor wooofer from B&C in Italy. With class leading thermal handing, motor strength, and inductance considerations you are assured of powerful and accurate bass reproduction.
| Design |
Vented |
| Drivers |
15" Extreme Duty Woofer |
| Powered |
Yes |
| Amp |
960W RMS (2100W PEAK) |
| Enclosure |
CNC machined MDF |
| Frequency Response |
19hz-150hz Anechoic (+/-3dB) |
| In-Room Extension |
16Hz-150Hz |
| Size (DxWxH) |
24" x 17" x 25" |
| Weight |
86 lbs |
Amp
ICEpower® audio technology
Amplifier Power: 960 watts
Inputs: Left and Right RCA
Inputs: Left and Right XLR
12V Trigger
On, Auto, Off selector
Gain control
Time delay(phase) control
Crossover control
Room size control
Custom DSP(digital signal processing) enables superior engineering refinement
CE and FCC approved; EMC and safety pre-approved
Fully integrated amplifier and power supply with mains-converter and auxiliary-converter
Patented HCOM modulation and control techniques for unparalleled audio accuracy
Sound optimized soft clipping
Soft start power up with mute/de-mute.
Thermal and over-current protection
Standby converter with low standby power consumption (less than 1 watt)
Universal mains operation (100-240 V, 50-60 Hz)
Standby power consumption 170 mW @ 230 V
ErP (1275/2008/EC) compliant
Energy Star®v3.0 compliant
117 dBA dynamic range
THD+N = 0.005 % @ 1 W (4 Ω, 1 kHz)
THD+N = 0.0008 % @ 50 W (4 Ω, 100 Hz)
CCIF IM distortion = 0.0003 %, 10 W, 4 Ω, 18.5 kHz / 1 kHz
High output current limit of 30 A
Assembled by Power Sound Audio
Cabinet
Assembled by Power Sound Audio
Vented/Ported Enclosure
Massive slot port with edge radius
Front-firing driver
Acoustically transparent fabric grille cover
Super durable, black sand textured finish
Precision machined CNC panels
Rigid MDF baffles
Heavily braced
Rear mounted amplifier
USA manufactured rubber feet
Dimensions (DxWxH): 22"x20"x24" includes grille
Weight: 108 lbs
Cabinet Made in the USA
Woofer
3000 W continuous program power capacity
110 mm (4 in) four layer aluminum voice coil
97 dB sensitivity
Neodymium magnet allows a very high force factor and linear excursion
Double silicone spider with optimized compliance
Ventilated voice coil gap for reduced power compression
Aluminum demodulating ring for very low distortion
