S3613
S3613
S3613
S3613
S3613

S3613

Regular price$3,499.99
/

Quantity
Auto Subwoofer EQ
Other Options in Similar Size

Unleash your home theater

Create the very best home theater experience with a powered subwoofer from Power Sound Audio. Energize your room with fast, dynamic bass and cinema quality sound.



-Dual opposing 18 inch drivers fire from each side of the S3613 to produce dynamic levels of bass that will fill your home theater with cinema-quality sound. Prepare to awe your friends and family with the S3613 home audio powered subwoofer.

-The S3613 subwoofer is powered by a 4000W RMS (6000W PEAK) cabinet mounted amplifier. A DSP based feature board includes the essential controls to properly integrate the subwoofer into your system.

-The MDF enclosure is heavily braced and assembled with rabbet joints for strong structural integrity. The enclosure is finished with a non-reflective and extremely durable textured material. Two acoustically transparent fabric grilles cover each side-firing 18 inch subwoofer driver. The amplifier is mounted on the rear baffle.

-The S3613 contains two 18 inch neodymium subwoofer drivers from B&C in Italy that were developed exclusively for PSA. This new woofer technology is based on a dual voice coil motor design with extraordinary motor strength, thermal handling, and sensitivity.
Design Sealed
Drivers Two 18" Italian Neodymium High BL Woofer
Powered Yes
Amp 4000W RMS (6000W PEAK)
Enclosure CNC machined MDF
Frequency Response 17Hz-200Hz  Anechoic (+/-3dB)
In-Room Extension 7Hz-11Hz
Size (DxWxH) 20" x 28" x 24" with grilles
Weight 137 lbs
  • Amplifier Power: 4000W RMS  6000W Peak 
  • Amplifier Topology: Innovative post-filter feedback class-D topology, achieves ruler-flat frequency response, low distortion and very high damping across the whole audio band
  • Uses latest generation power MOSFET transistors and highly optimized output stage for up to 95% efficiency, allowing quiet fan-less operation up to unprecedented power levels
  • Full featured protection: DC, overload, low impedances, shorts, under/over-voltage, overheating, etc.
  • Includes gentle soft-start and long-term power limiter to reduce the chances of  tripping breakers
  • 120VAC (optional 120VAC-240VAC for an additional charge)
  • Unbalanced Inputs: Left and Right RCA
  • Balanced Input/Output: XLR input and XLR loop output. 
  • On, Auto, Off selector
  • Gain control
  • Time delay(phase) control
  • Crossover control
  • Room size control
  • Custom DSP(digital signal processing) enables superior engineering refinement
  • LED indicators for standby and power mode
  • Sealed Enclosure
  • Side-firing drivers
  • Reactive force canceling driver array
  • Acoustically transparent fabric grille covers
  • Super durable, black sand textured finish
  • Precision machined CNC panels
  • Rigid MDF baffles
  • Heavily braced
  • Rear mounted amplifier
  • USA manufactured rubber feet
  • Dimensions (DxWxH): 20"x28"x24" includes grilles
  • Weight: 137 lbs
  • Cabinet Made in the USA
  • 3000 W continuous program power capacity
  • 100mm (4 in.) four layer aluminum voice coil
  • 98 dB sensitivity 
  • Neodymium magnet allows a very high force factor and linear excursion 
  • Double silicon spider with optimized compliance
  • Ventilated voice coil gap for reduced power compression
  • Aluminum demodulation ring for very low distortion 
  • Performance coming soon!

    Assembled with pride in Mineral Ridge, ohio

    You may also like


    Recently viewed