Unleash your home theater
Create the very best home theater experience with a powered subwoofer from Power Sound Audio. Energize your room with fast, dynamic bass and cinema quality sound.
-The S18NEO-M subwoofer is powered by a 800W RMS (1600W PEAK) built-in amplifier with ICEpower® audio technology. A DSP based feature board includes the essential controls to properly integrate the subwoofer into your system.
-The MDF enclosure is well braced with a double thickness woofer baffle. The enclosure is finished with a non-reflective matte covering. An acoustically transparent fabric grille covers the front-firing 18 inch subwoofer driver. The amplifier is mounted on the rear baffle.
- The S18NEO-M contains a single 18 inch neodymium driver that was developed exclusively for PSA. This new woofer technology is based on a dual voice coil motor design that prioritizes motor strength, thermal handling, and sensitivity.Three of the most important attributes that lead to optimal sound quality.
| Design | Sealed | 
|---|---|
| Drivers | 18 inch Neodymium high BL woofer | 
| Powered | Yes | 
| Amp | 800W RMS (1600W PEAK) | 
| Enclosure | CNC machined MDF | 
| Frequency Response | 21Hz-200Hz Anechoic (+/-3dB) | 
| In-Room Extension | 12Hz-16Hz | 
| Unboxed Size (DxWxH) | 22" x 20" x 20.5" with grille | 
| Boxed Size (DxWxH) | 25" x 27" x 26" | 
| Unboxed Weight | 79 lbs | 
| Boxed Weight | 87 lbs | 
Included In The Box
-One S18NEO-M powered subwoofer 
-Grille 
-One owner's manual 
-One 6' AC power cord 
Amp
-ICEpower® audio technology 
-Amplifier Power: 800 watts 
-Inputs: Left and Right RCA 
-Inputs: Left and Right XLR12V Trigger 
-On, Auto, Off selector 
-Gain control 
-Time delay(phase) control 
-Crossover control
-Room size control 
-Custom DSP(digital signal processing) enables superior engineering refinement 
-CE and FCC approved; EMC and safety pre-approved 
-Fully integrated amplifier and power supply with mains-converter and auxiliary-converter 
-Patented HCOM modulation and control techniques for unparalleled audio accuracy 
-Sound optimized soft clipping 
-Soft start power up with mute/de-mute 
-Thermal and over-current protection 
-Standby converter with low standby power consumption (less than 1 watt) 
-Universal mains operation (100-240 V, 50-60 Hz) 
-Standby power consumption 170 mW @ 230 VErP (1275/2008/EC) compliant 
-Energy Star®v3.0 compliant 
-117 dBA dynamic range 
-THD+N = 0.005 % @ 1 W (4 Ω, 1 kHz)THD+N = 0.0008 % @ 50 W (4 Ω, 100 Hz)CCIF IM distortion = 0.0003 %, 10 W, 4 Ω, 18.5 kHz / 1 kHz 
-High output current limit of 30 A 
Cabinet
-Sealed Enclosure 
-Front-firing driver 
-Acoustically transparent fabric grille cover 
-Non-reflective matte black finish 
-Precision machined CNC panels 
-Rigid MDF baffles 
-Heavily braced 
-Rear mounted amplifier 
-Rubber feet 
-Dimensions (DxWxH): 22"x20"x20.5" with grille 
-Weight: 79 lbs 
Woofer
-2800 W continuous program power capacity 
-100mm (4 in.) four layer aluminum voice coil 
-96.5 dB sensitivity 
-Neodymium motor with high weight/BL(magnet flux) ratio. 
-Double silicon spider with optimized compliance 
-Ventilated voice coil gap for reduced power compression 
-Aluminium demodulation ring for very low distortion 
--Made in China
 
         
       
         
         
         
         
         
     
     
     
     
