DISCONTINUED
Unleash your home theater
Create the very best home theater experience with a powered subwoofer from Power Sound Audio. Energize your room with fast, dynamic bass and cinema quality sound.
-The S1812 combines incredibly deep extension with prodigious mid and upper bass capabilities in a large, but manageable cabinet size. A wonderful balance of size, sheer power, and articulation.
-The TV1812 subwoofer is powered by a 960W RMS (2100W PEAK) built-in amplifier with ICEpower® audio technology. A DSP based feature board includes the essential controls to properly integrate the subwoofer into your system.
-The MDF enclosure is heavily braced and assembled with rabbet joints for strong structural integrity. The enclosure is finished with a non-reflective and extremely durable textured material. An acoustically transparent fabric grille covers the front-firing 18 inch subwoofer driver. The amplifier is mounted on the rear baffle.
-The S1812 contains a single 18 inch neodymium subwoofer driver from B&C in Italy.
-This next evolution subwoofer uses a new, longer, four layer aluminum voice coil. The result is more energy in the gap, less heat, higher sensitivity, higher power handling, lower distortion and better overall performance.
| Design | Sealed |
|---|---|
| Drivers | 18" Extreme Duty Woofer |
| Powered | Yes |
| Amp | 960W RMS (2100W PEAK) |
| Enclosure | CNC machined MDF |
| Frequency Response | 14hz-150Hz Anechoic (+/-3dB) |
| In-Room Extension | 9hz-11Hz |
| Size (DxWxH) | 22" x 20" x 20.5”with grille |
| Weight | 79 lbs |
Amp
-ICEpower® audio technology-Amplifier Power: 960 watts
-Inputs: Left and Right RCA
-Inputs: Left and Right XLR
-12V Trigger
-On, Auto, Off selector
-Gain control
-Time delay(phase) control
-Crossover control
-Room size control
-Custom DSP(digital signal processing) enables superior engineering refinement
-CE and FCC approved; EMC and safety pre-approved
-Fully integrated amplifier and power supply with mains-converter and auxiliary-converter
-Patented HCOM modulation and control techniques for unparalleled audio accuracy
-Sound optimized soft clipping
-Soft start power up with mute/de-mute.
-Thermal and over-current protection
-Standby converter with low standby power consumption (less than 1 watt)
-Universal mains operation (100-240 V, 50-60 Hz)
-Standby power consumption 170 mW @ 230 V
-ErP (1275/2008/EC) compliant
-Energy Star®v3.0 compliant
-117 dBA dynamic range
-THD+N = 0.005 % @ 1 W (4 Ω, 1 kHz)
-THD+N = 0.0008 % @ 50 W (4 Ω, 100 Hz)
-CCIF IM distortion = 0.0003 %, 10 W, 4 Ω, 18.5 kHz / 1 kHz
-High output current limit of 30 A
-Assembled by Power Sound Audio
Cabinet
-Sealed Enclosure-Front-firing driver
-Acoustically transparent fabric grille cover
-Super durable, black sand textured finish
-Precision machined CNC panels
-Rigid MDF baffles
-Heavily braced
-Rear mounted amplifier
-USA custom manufactured nylon standoffs
-Dimensions (DxWxH): 27"x21"x31" includes grille
-Weight: 140 lbs
-Cabinet Made in the USA
Woofer
-3000 W continuous program power capacity-100mm (4 in.) four layer aluminum voice coil
-98 dB sensitivity
-Neodymium magnet allows a very high force factor and linear excursion
-Double silicon spider with optimized compliance
-Ventilated voice coil gap for reduced power compression
-Aluminium demodulation ring for very low distortion
