-
The XS30 is moderately sized with a midbass "slam" factor that will leave you gasping for breath. In all but very large rooms, the XS30 will extend into single digits, creating a realistic sound field from almost any source material.
-
Design Sealed Drivers Two 15" High Excursion Powered Yes Amp 725W RMS (1450W PEAK) Enclosure CNC machined MDF Frequency Response 19Hz-200Hz +/-3dB In-Room Extension 9Hz-14Hz Size (DxWxH) 18" x 24" x 22.5" with grilles Weight 107 lbs
DISCONTINUED
Unleash your home theater
Create the very best home theater experience with a powered subwoofer from Power Sound Audio. Energize your room with fast, dynamic bass and cinema quality sound.
-
The XS30 subwoofer is powered by a 725W RMS (1450W PEAK) built-in amplifier with BASH® audio technology. A DSP based feature board includes the essential controls to properly integrate the subwoofer into your system.
The MDF enclosure is heavily braced and assembled with rabbet joints for strong structural integrity. The enclosure is finished with a non-reflective and extremely durable textured material. Two acoustically transparent fabric grilles cover each side-firing 15 inch subwoofer driver. The amplifier is mounted on the rear baffle.
The XS30 contains two 15 inch subwoofer drivers, which are capable of moving massive amounts of air. The 1 inch surround and poly cotton semi-progressive, high excursion spider allow the cone to move more than 2 inches peak to peak. The cast aluminum frame is mounted to the extremely linear and dynamic motor system, which provides the power to drive the cone in a symmetrical motion.
-
- Amplifier Power: 725W RMS (continuous), 1450W Peak (dynamic)
- Amplifier Topology: PS BASH® - Patented hybrid amplifier uses best of Class D and Class AB
- Precision analog control through DSP (digital signal processing)
- Inputs: Left (LFE) and Right RCA connections
- 0o to 180o Continuous Phase Control
- 40Hz-150Hz/LFE Variable Crossover
- Off/Auto/On Selector
- Voltage: 100-120V/220-240V~50/60Hz (6.3A) with auto-switching
- Stand-By Power: Less than 1W
- Temperature sensing protection
- Driver voltage monitoring with DC offset protection
- Driver current monitoring with overload, short circuit, and load protection.
- Primary voltage monitoring to control dynamic and average power limits
- Soft limiting protection
- Frequency dependent compressors
- Energy Star compliant
- Sealed Enclosure
- Side-firing drivers
- Reactive force canceling driver array
- Acoustically transparent fabric grille covers
- Super durable, black sand textured finish
- Precision machined CNC panels
- Rigid MDF baffles
- Heavily braced
- Rear mounted amplifier
- USA manufactured rubber feet
- Dimensions (DxWxH): 18"x24"x22.5" includes grilles
- Weight: 107 lbs
- Made in the USA
- Power Sound Audio proprietary 15” driver
- High excursion capabilities (2" peak to peak)
- Optimized motor using Finite Element Analysis (FEA)
- Low carbon steel motor structure for optimized flux flow
- Aero vented pole geometry for quiet operation and efficient cooling
- Triple stack of Y35 grade magnets
- Reinforced curvilinear kraft pulp cone
- Rubatek foam surround
- Twelve spoke aluminum frame for a rigid foundation
- Flat wound copper coil on a black anodized former allowing for effective heat dissipation and rigidity
- Single poly cotton semi-progressive, high excursion spider
- Fatigue limiting designed, forty-eight tinsel count lead wire
- Assembled in the USA
-
XS30 Frequency Response
The frequency response graph shows how the subwoofer will sound for a given input frequency or tone. Accurate reproduction of the source material is achieved with a flat frequency response as shown in the graph.
XS30 Compression
The compression graph indicates how the output of the subwoofer changes as the input signal increases.
20Hz - 31Hz: 116.6 dB 40Hz - 63Hz: 131.2 dB 20Hz - 63Hz: 126.7 dB
