Special Order Only - Contact Before Purchase
Unleash your home theater
Create the very best home theater experience with a powered subwoofer from Power Sound Audio. Energize your room with fast, dynamic bass and cinema quality sound.
-The TV1813DF combines incredibly deep extension with prodigious mid and upper bass capabilities in a large, but manageable cabinet size. A wonderful balance of size, sheer power, and articulation.
-The TV1813DF subwoofer is powered by a 1920W RMS (4300W PEAK) built-in amplifier with ICEpower® audio technology. A DSP based feature board includes the essential controls to properly integrate the subwoofer into your system.
-The MDF enclosure is heavily braced and assembled with rabbet joints for strong structural integrity. The enclosure is finished with a non-reflective and extremely durable textured material. The down-firing 18 inch subwoofer driver is mounted to the bottom baffle of the enclosure. The 4 inch port and amplifier are both mounted on the rear baffle.
-The TV1813DF contains a single 18 inch neodymium subwoofer driver from B&C in Italy that was developed exclusively for PSA. This new woofer technology is based on a dual voice coil motor design with extraordinary motor strength, thermal handling, and sensitivity.
| Design | Vented |
|---|---|
| Drivers | 18" Italian Neodymium High BL Woofer |
| Powered | Yes |
| Amp | 1920W RMS (4300W PEAK) |
| Enclosure | CNC machined MDF |
| Frequency Response | 15hz-150Hz Anechoic (+/-3dB) |
| In-Room Extension | 10hz-12Hz |
| Size (DxWxH) | 21.5" x 28.5" x 24" |
| Weight | 135 lbs |
Included In The Box
-One TV1813DF powered subwoofer-One owner's manual
-One 6' AC power cord
Amp
-ICEpower® audio technology-Amplifier Power: 1920 watts
-Inputs: Left and Right RCA
-Inputs: Left and Right XLR
-12V Trigger
-On, Auto, Off selector
-Gain control
-Time delay(phase) control
-Crossover control
-Room size control
-Custom DSP(digital signal processing) enables superior engineering refinement
-CE and FCC approved; EMC and safety pre-approved
-Fully integrated amplifier and power supply with mains-converter and auxiliary-converter
-Patented HCOM modulation and control techniques for unparalleled audio accuracy
-Sound optimized soft clipping
-Soft start power up with mute/de-mute.
-Thermal and over-current protection
-Standby converter with low standby power consumption (less than 1 watt)
-Universal mains operation (100-240 V, 50-60 Hz)
-Standby power consumption 170 mW @ 230 V
-ErP (1275/2008/EC) compliant
-Energy Star®v3.0 compliant
-117 dBA dynamic range
-THD+N = 0.005 % @ 1 W (4 Ω, 1 kHz)
-THD+N = 0.0008 % @ 50 W (4 Ω, 100 Hz)
-CCIF IM distortion = 0.0003 %, 10 W, 4 Ω, 18.5 kHz / 1 kHz
-High output current limit of 30 A
-Assembled by Power Sound Audio
Cabinet
-Vented/Ported Enclosure-Down-firing driver
-Rear mounted 4 inch Precision Port
-Satin black finish
-Precision machined CNC panels
-Rigid MDF baffles
-Heavily braced
-Rear mounted amplifier
-Dimensions (DxWxH): 21.5"x28.5x24”
-Weight: 135 lbs
-Cabinet Made in the USA
Woofer
-3000 W continuous program power capacity-100mm (4 in.) four layer aluminum voice coil
-98 dB sensitivity
-Neodymium magnet allows a very high force factor and linear excursion
-Double silicon spider with optimized compliance
-Ventilated voice coil gap for reduced power compression
-Aluminum demodulation ring for very low distortion
Performance coming soon!
Assembled with pride in Mineral Ridge, ohio
Assembled with pride in Mineral Ridge, ohio