TV1813DF
TV1813DF
TV1813DF
TV1813DF
TV1813DF

TV1813DF

Regular price$2,199.99
/

limited STOCK


Quantity
Auto Subwoofer EQ

Special Order Only - Contact Before Purchase

Unleash your home theater

Create the very best home theater experience with a powered subwoofer from Power Sound Audio. Energize your room with fast, dynamic bass and cinema quality sound.


-The TV1813DF combines incredibly deep extension with prodigious mid and upper bass capabilities in a large, but manageable cabinet size. A wonderful balance of size, sheer power, and articulation.

-The TV1813DF subwoofer is powered by a 1920W RMS (4300W PEAK) built-in amplifier with ICEpower® audio technology. A DSP based feature board includes the essential controls to properly integrate the subwoofer into your system.

-The MDF enclosure is heavily braced and assembled with rabbet joints for strong structural integrity. The enclosure is finished with a non-reflective and extremely durable textured material. The down-firing 18 inch subwoofer driver is mounted to the bottom baffle of the enclosure. The 4 inch port and amplifier are both mounted on the rear baffle.

-The TV1813DF contains a single 18 inch neodymium subwoofer driver from B&C in Italy that was developed exclusively for PSA. This new woofer technology is based on a dual voice coil motor design with extraordinary motor strength, thermal handling, and sensitivity.
Design Vented
Drivers 18" Italian Neodymium High BL Woofer
Powered Yes
Amp 1920W RMS (4300W PEAK)
Enclosure CNC machined MDF
Frequency Response 15hz-150Hz Anechoic (+/-3dB)
In-Room Extension 10hz-12Hz
Size (DxWxH) 21.5" x 28.5" x 24"
Weight 135 lbs

Included In The Box

  • One TV1813DF powered subwoofer
  • One owner's manual
  • One 6' AC power cord

  • Amp

  • ICEpower® audio technology
  • Amplifier Power: 1920 watts
  • Inputs: Left and Right RCA
  • Inputs: Left and Right XLR
  • 12V Trigger
  • On, Auto, Off selector
  • Gain control
  • Time delay(phase) control
  • Crossover control
  • Room size control
  • Custom DSP(digital signal processing) enables superior engineering refinement
  • CE and FCC approved; EMC and safety pre-approved
  • Fully integrated amplifier and power supply with mains-converter and auxiliary-converter
  • Patented HCOM modulation and control techniques for unparalleled audio accuracy
  • Sound optimized soft clipping
  • Soft start power up with mute/de-mute.
  • Thermal and over-current protection
  • Standby converter with low standby power consumption (less than 1 watt)
  • Universal mains operation (100-240 V, 50-60 Hz)
  • Standby power consumption 170 mW @ 230 V
  • ErP (1275/2008/EC) compliant
  • Energy Star®v3.0 compliant
  • 117 dBA dynamic range
  • THD+N = 0.005 % @ 1 W (4 Ω, 1 kHz)
  • THD+N = 0.0008 % @ 50 W (4 Ω, 100 Hz)
  • CCIF IM distortion = 0.0003 %, 10 W, 4 Ω, 18.5 kHz / 1 kHz
  • High output current limit of 30 A
  • Assembled by Power Sound Audio

  • Cabinet

  • Vented/Ported Enclosure
  • Down-firing driver
  • Rear mounted 4 inch Precision Port
  • Satin black finish
  • Precision machined CNC panels
  • Rigid MDF baffles
  • Heavily braced
  • Rear mounted amplifier
  • Dimensions (DxWxH): 21.5"x28.5x24”
  • Weight: 135 lbs
  • Cabinet Made in the USA

  • Woofer

  • 3000 W continuous program power capacity
  • 100mm (4 in.) four layer aluminum voice coil
  • 98 dB sensitivity
  • Neodymium magnet allows a very high force factor and linear excursion
  • Double silicon spider with optimized compliance
  • Ventilated voice coil gap for reduced power compression
  • Aluminum demodulation ring for very low distortion

  • Performance coming soon!

    Assembled with pride in Mineral Ridge, ohio

    You may also like